Resin toy casting process

Mixing Ingredients

Resin Toys Mold Casting

The molds should be placed flat and the inner surface of the mold should be cleaned so that it can be cast. When pouring, use a small spoon to scoop up the slurry and pour it slowly one by one to let it flow naturally. This way you can squeeze out the air bubbles. Otherwise, there will be air holes in the finished product. Be careful not to overflow the outside of the mold when pouring it into the mold. After pouring out the outside, it should be cleaned and eradicated immediately, otherwise it will need to be processed and polished after molding. After the slurry is poured into the mold, it will solidify in 1-2 hours, and it can be demoulded after solidification.

Resin Art Toys Making Methods

• The method for making unsaturated resin art toys includes the following steps:

(1) Make a mold from silicone rubber according to the shape of the resin toys;

(2) Add an appropriate amount of filler to the unsaturated resin and stir evenly;

(3) Before pouring into the mold, add curing agent and accelerator to the unsaturated resin, stir evenly and then pour into the mold;

(4) After the resin is solidified, the mold is demoulded to obtain the resin toys in the desired designs. Simulation figures toys of various shapes can be cast at room temperature, with rapid solidification, realistic details and simple process.